Contractor Markup vs. Margin: Why Adding 20% Does Not Give You a 20% Margin
A contractor estimates a job at $48,000, adds 20%, and submits a $57,600 bid. The arithmetic is right. Calling the result a 20% gross margin is wrong.
The difference is the number underneath the percentage. Markup measures the amount added against cost. Margin measures the amount remaining against the selling price. Confusing the two can leave a bid short of its intended return before the first delivery arrives.
This is an estimating concept covered in Peerless's General B material. The worked job below is an original teaching example, with simplified costs so you can follow every dollar.
The same $9,600 produces two different percentages
Assume the $48,000 includes all costs classified as cost of the work sold in this example. Separate company operating expenses have not yet been deducted.
| Item | Calculation | Amount |
|---|---|---|
| Estimated cost of the work | Given | $48,000 |
| 20% markup on cost | $48,000 × 0.20 | $9,600 |
| Selling price | $48,000 + $9,600 | $57,600 |
| Gross profit | $57,600 − $48,000 | $9,600 |
| Gross margin | $9,600 ÷ $57,600 | 16⅔% |
The markup is $9,600 divided by $48,000: 20%. The gross margin is $9,600 divided by $57,600: about 16.67%. The dollars have not changed. The denominator has.
A quick check is to imagine dividing the selling price into 100 equal pieces. At $57,600, each piece is $576. The $9,600 gross profit buys only 16⅔ of those pieces, not 20.
Build the price backward from the margin target
If the target is a 20% gross margin, the cost must occupy the other 80% of the selling price. That gives you the equation:
Selling price = cost ÷ (1 − target margin)
For this job: $48,000 ÷ 0.80 = $60,000. The gross profit is then $12,000, and $12,000 ÷ $60,000 = 20%.
That $12,000 is a 25% markup on the $48,000 cost. A 20% margin requires a 25% markup under these assumptions.
| Target margin | Required markup on cost | Price on $48,000 cost |
|---|---|---|
| 10% | 11.11% | $53,333.33 |
| 20% | 25% | $60,000 |
| 25% | 33⅓% | $64,000 |
| 30% | 42.86% | $68,571.43 |
These percentages demonstrate the relationship; they are not recommended margins for every contractor. The business still has to estimate its costs, overhead, risks, capacity, and market.
Below your target does not automatically mean a loss
The $57,600 bid produces $9,600 of gross profit in this example. Whether that leaves a profit after other expenses depends on what still has to be paid.
Suppose $7,000 of company operating expenses is assigned to this job for planning purposes, and it has not already been included in the $48,000:
- At a $57,600 price: $9,600 gross profit − $7,000 operating expenses = $2,600 before any other applicable charges.
- At a $60,000 price: $12,000 gross profit − $7,000 operating expenses = $5,000 before any other applicable charges.
The first bid misses the gross-margin target but still has a positive result under the stated assumptions. Change those remaining expenses to $11,000 and the same bid produces a negative $1,400 result. You need the remaining expenses to determine the outcome.
The SEC's explanation of income statements makes the underlying distinction: gross profit is a subtotal before further expenses, while net income reflects the remaining deductions. An estimate should keep those stages visible.
The overhead trap: counting it twice, or missing it entirely
Before applying any percentage, label the cost base. Does it include the project superintendent, temporary facilities, rented equipment, payroll burden, and an allocation of office expenses? Which items are job costs, and which remain company operating expenses?
Use the accounting classifications required by the problem or your business's consistent accounting method. A superintendent assigned to one project and an office administrator serving the whole business need not land in the same category. What matters for this calculation is that each cost is included once and that you know which expenses remain below gross profit.
Adding a margin formula to an incomplete cost estimate does not repair the missing costs. Likewise, deducting the same overhead twice can make a sound bid appear unprofitable.
A 10% discount can consume more than 10% of the profit
Return to the $60,000 bid with $48,000 cost and $7,000 of separate operating expenses. Before a discount, the simplified result is $5,000.
A customer asks for 10% off. The price falls by $6,000 to $54,000. If scope and costs stay the same, gross profit falls to $6,000, and the result after the $7,000 operating-expense allowance becomes negative $1,000.
The discount took 10% off revenue and more than all of the planned $5,000 return. Negotiating a lower price without changing the cost or scope sends the reduction straight through this example's remaining profit.
Try the reasoning without the answer choices
Original practice problem: A job's estimated cost of work sold is $84,000. The contractor wants a 30% gross margin. What selling price meets the target?
- $109,200
- $112,000
- $120,000
- $126,000
Answer: C, $120,000. Divide $84,000 by 0.70. Subtracting the cost leaves $36,000, which is 30% of $120,000. Choice A comes from adding a 30% markup. That gives a margin of only $25,200 ÷ $109,200, about 23.08%.
When an estimating question says “profit,” pause long enough to identify whether it means a dollar amount, markup on cost, gross margin on selling price, or a result after overhead. The formula follows that definition.
To continue this topic, use the Peerless General B Study Guide with the estimating topics in the General Building exam outline.
Sources
- Peerless General B study material: cost estimating and the selling-price example, printed pages 32–33 and 37. This article uses new figures and independently checked calculations.
- SEC: Beginners' Guide to Financial Statements, Income Statements.
- University of Maine Cooperative Extension: Basic Pricing Strategies, markup based on cost versus selling price.