Skip to content
Promo Pricing

CSLB Ceramic and Mosaic Tile (C-54): Study Guide and Online Practice Exam

$125.00 $225.00 Save $100.00 Free Shipping

Promo pricing through September 30, 2026.

30 diagrams in Ceramic and Mosaic Tile (C-54) online practice

What’s included


What this covers

Per the state's classification, a C-54 contractor selects, cuts, and installs ceramic, mosaic, quarry, and porcelain tile on floors, walls, countertops, and other surfaces. This printed book covers the subjects the state tests. See the official CSLB C-54 classification.


Sample questions: Try our free practice test

  1. What is the part of the wall from which the arch springs?
    A. Extrados · B. Intrados · ✓ C. Pier · D. Spandrel
  2. The vertical distance between the spring points and the highest point of the soffit is called the:
    ✓ A. Rise · B. Skewback · C. Span · D. Spring line
  3. The name of the uppermost or central voussoir in an arch is the:
    A. Bow · ✓ B. Key · C. Skewback · D. Springer
  4. Applying tile directly to wood by means of a thin-set portland cement mortar with no base material between is not recommended, because:
    A. mortar dries out too fast · ✓ B. wood tends to move and the tile may shear off · C. mortar will not adhere to wood · D. wood absorbs all the mortar
  5. Backing should be prepared in what manner, if mortar is applied over studs?
    A. Use vapor barrier with 1 inch overlap · B. Use metal lath with 1 inch overlap · ✓ C. If the studs are more than 6 inches on center, tie wire should be installed · D. All of the above
  6. Because of a special treatment of the glaze and bisque, faience tiles have a:
    A. machined finish · B. thick base · ✓ C. handmade appearance · D. slick surface

Practice with diagrams

30 diagrams in Ceramic and Mosaic Tile (C-54) online practice

Read a sample diagram, choose an answer, then reveal the explanation. The online course includes diagram questions with feedback.

Room width compared with centered tile module alternatives and balanced cuts.
Centered tile layout and balanced edge cuts · Open full-size diagram

Try a sample question

What equal end cut follows with eight full modules?

  1. 7 in.
  2. 14 in.
  3. 3.5 in.
  4. 10.5 in.
Show answer and explanation

A. 7 in.

(110-8*12)/2 = 7 in..